- Automatic switching of speakers between a local source input and distributed
audio system sources
- Space-saving low profile design permits installation in areas most amplifiers
will not fit
- Bridgeable to create one channel with substantial power output
- Reliable and robust circuitry designed for stability
Overview
Amplifiers are the muscle behind every music system. R235LS puts great pride
and effort into building amplifiers that supply years of problem-free service
Performance Features
The R235LS allows a local source (e.g., PC or TV in the bedroom) to automatically
override the speakers in that particular zone of a distributed audio system. This
can be accomplished with its auto sensing line input or with its trigger input for
versatility in many different applications.
Design Features
The R235LS is rated at 35 watts per channel into 8 ohms and 50 watts per channel
into 4 ohms. In bridged mode the R235LS is rated at 100 watts of power into a single
8-ohm load. Each amplifier output channel incorporates robust protection circuitry
for safety and reliability under extreme circumstances.
Specifications
| Stereo
Continuous Output Power |
35W per channel at 8 ohms
50W per channel at 4 ohms |
| Bridged
Mono Output Power |
100W at 8 ohms |
| Distortion |
<0.05% THD+N from 20Hz to 20kHz |
| Signal-to-Noise
Ratio |
>100dB A-weighted |
| Frequency
Response |
20Hz to 20kHz ±0.3dB |
| Input
Sensitivity |
70m V for 1W at 8 ohms
420mV for 35W at 8 ohms |
| Line
Input Impedance |
47 kilohms |
| Voltage
Gain |
32dB |
| Delay
Time |
5 seconds to 4.5 minutes |
| Input
Trigger |
12VDC 10 kilohms |
| Output Trigger |
12VDC 100mA max |
| Power
Requirements |
230VAC 50Hz 0.6A |
| Dimensions |
8.625" W x 10"D x 2.375"H (22 x 25.4
x 6 cm) |
| Weight |
8.5 lbs. (3.8kg) |
OUR PRODUCTS
