Shop by

f
Home About Us Gallery Demos Products Concepts Ordering Contact Us
Smart Home Smart Hotel Smart Office
     
Smart Home UAE Login
Smart Home UAE View Cart Smart Home UAE Order Status
dealers login
Our Products
Search:
Advanced Search

PRODUCT DETAILS

Home Lighting & Dimming User Frontend

SH710 SwitchLinc V2 Timer

SwitchLinc V2 Timer

  • Easy same-button operation turns on the switch and activates the timer
  • Control lights and appliances remotely, turning them on and off
  • Create whole-house lighting scenes in minutes
  • Easy-to-install switch uses INSTEON (patent pending) technology for superior performance and reliability
  • INSTEON technology received the Consumer Electronic Show (CES) Innovations 2005 Design and Engineering Award

Overview

Worried about throwing away money on electricity because someone forgot to turn off the lights? Install the INSTEON SwitchLinc V2 Timer, and you won't have to worry any more. Just replace your existing wall switch with the new SwitchLinc V2 Timer, and it will turn off all by itself! This is a perfect switch for the kids' room or for the bathroom fan that you always leave on. It works as a standalone wall switch timer or with your INSTEON network, adding local countdown timer control to your INSTEON network without computer-controlled timer software.

Performance Features

Press the paddle top to turn on the switch and activate the built-in timer, which will automatically turn the light off in 15 minutes. Tap the paddle top again, and the light will stay on for 1 hour. Each additional tap will add another hour to the timer, up to a maximum of 24 hours. If you would like the SwitchLinc V2 Timer to act like a standard switch, press and hold the paddle top for about 2 seconds, and it will stay on until you turn it off. This INSTEON-enabled switch can still be controlled like any other INSTEON device.

The SwitchLinc V2 Timer can control up to a 480-watt incandescent or 13A resistive load. Note: When you use another INSTEON device to control the switch or use the SwitchLinc V2 Timer to control another INSTEON device, the timer function does not apply. It will act like a standard SwitchLinc V2 Relay. If you need a switch to control dimmable devices, use either the SwitchLinc V2 Dimmer , or the high-power SwitchLinc V2 Dimmer 1000W. You can install the Smarthome Manager Essential's Timer Software on your computer to schedule any SwitchLinc V2 Timer or any other INSTEON-enabled device to turn on or off at any specific time or even at sunrise and sunset.

Specifications

General
Smarthome Product Number 2476ST, INSTEON SwitchLinc V2 Timer Switch
Warranty 2 years (Upgradeable to 7 years
Operation
LED Bar Brightness Indicator 8 White LEDs, Optional Green, Blue, Amber, or Red
Manual Operation Modes INSTEON only, X10 only, INSTEON and X10 Combo Mode
Combo Mode Message Order INSTEON, X10, INSTEON cleanup
Multi-Way Circuit Support One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Relays or other INSTEON Controllers
Setup Memory Non-volatile EEPROM
Timer Features
Standard Delay: 15 Minutes
Maximum Delay: 24 hours
Per Tap Delay: 1 hour for each additional tap
INSTEON Features
INSTEON Addresses 1 hard-coded out of 16,777,216 possible
INSTEON Links 417 out of 16,777,216 possible
INSTEON Powerline Frequency 131.65 KHz
INSTEON Minimum Transmit Level 3.2 Vpp into 5 Ohms
INSTEON Minimum Receive Level 1 mVpp nominal
INSTEON Messages Repeated Yes
Mechanical
Paddle Type True rocker action
Paddle and Trim Frame Color White installed, Ivory included;Optional Almond, Black, Brown, or Gray
Wire Nuts 3 included
Mounting Mounts in single or multiple-ganged junction box.
Operating Conditions Indoors, 40 to 104F, up to 85% relative humidity
Dimensions 4.1" H x 1.8" W x 1.2" D
Weight 3.6 oz
Electrical
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection MOV rated for 150 Volts
Power Wire Leads 6", 16 AWG, stranded, 600V, 105C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white)
Ground Lead 6", 18 AWG, stranded, bare copper
Load Types Wired-in incandescent lighting and inductive loads
Maximum Load 480 Watts incandescent, 13A resistive
Minimum Load No minimum load required
Certification Safety tested for use in USA and Canada (ETL #3017581)
X10 Features
X10 Primary Address 1 optional (comes unassigned)
X10 Scene Addresses 255 possible
X10 Status Response Supported
X10 Resume Dim Supported (by setting Local On-Level to zero)
X10 Powerline Frequency 120 KHz
X10 Minimum Transmit Level 3.2 Vpp into 5 Ohms
X10 Minimum Receive Level 10 mVpp nominal
X10 Messages Repeated No