- Works in conjunction with the DESD Studio 2005– Automation Made Easy
Software
- Suitable for home, office, classroom and factory automation where high
voltage (110 or 240 Vac) need to be controlled remotely & safely
- No programming skills required
- Replaceable parts: the high voltage relays are replaceable (using the
same relay specifications) should any of them turns malfunction
- Use higher contact rating relays: other higher contact rating relays
can be used instead of the one that comes together with the unit. The open collector
capable of supporting maximum 12 mA current sink per output port
- Simplified wiring (control and electrical cables) in the integrated system
- Reliable and stable connection using UTP
- Customer need to know the electrical wiring or hire the electrical installer
- Modular design hence low maintenance cost in the near future
Specifications
Ethernet connection 10 Mbps |
Protocols |
TCP, UDP, DHCP |
Protection |
Built-in transformer with 1.5 KV magnetic isolation |
Relay |
8 of 10 Ampere (double pole double throw) relays |
Open collector |
Able to stand maximum 12 mA (should user need to
drive other high voltage relays) current sink per output port |
RS232 port |
DB-9 Male
TTL (TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND) |
Parity |
None, Even, Odd |
Data bits |
8 |
Stop bits |
1, 2 |
Flow control |
RTS/CTS, XON/XOFF |
Baudrate |
300 bps to 115.2 Kbps |
Configure |
DESD Studio 2005 software (Edit mode) |
Power requirement |
Power input |
12 to 24 VDC |
Consumption |
200 mA |
Operating temperature |
0 to 70 degree C (32 to 158 degree F) |
|