- 230V single phase & neutral supply at 0.25A
- 2 x RS485 serial ports, supports DyNet & DMX512 TX
- Optical Isolation between ports
- Programmable message filtering
- Programmable logic controller
- 365 day real time clock with sunrise / sunset & daylight saving features
- DMX512 Transmit - 120 Channels
- Memory: 8Kb EEPROM, 512Kb DRAM, 1024Kb FLASH
- Dimensions H 320mm x W 225mm x D 70mm
- Packed weight 3.1kg
Overview
The Dynalite DTK932V7 is a flexible network communications bridge designed for RS485
networks. The two opto-isolated RS485 ports enable the DTK932V7 to implement a trunk
and spur topology on large project sites, with the bridge providing a high-speed
backbone opto-coupled to many lower speed spurs. It also provides isolation of electrical
faults to individual spurs and augments network security and robustness through
the definition of packet filtering rules for each direction.
Performance Features
The DTK932V7 allows bi-directional DyNet to DMX512 conversion, making the device
perfect for the integration of DMX512 lighting fixtures, or to allow the lighting
operator temporary control of the house lights from the lighting console in an auditorium
scenario.
The DTK932V7 is capable of routing DyNet and third party protocols, such as audio-visual
and building automation systems (BAS), providing an integrated approach to total
building control and energy management.
Specifications
| Supply |
230V 50/60Hz single phase & neutral
at 25
Watts |
| Control Ports |
2 x RS485 DyNet/DMX512 serial ports |
| Serial Port Isolation |
3.75KV RMS optical isolation between
ports |
| User Controls |
Service switch
Diagnostic LED |
| Internal Controls |
365 day time clock with 250 Events,
Sunrise/Sunset & Daylight Savings
functions
Programmable Logic Controller
Packet filtering |
| DMX512 Functions |
DMX512 Transmit: up to 120 channels |
| DyNet DC Supply |
750mA (supply for approx. 37.5 Smart
Panels) |
| Supply Terminals |
Phase, Neutral
1 x 4mm2 max conductor size |
| Serial Port Terminals |
Serial Port 1:
GND, D+, D−, +15V
1 x 2.5mm2 max conductor size |
| Diagnostic Functions |
Device Online/Offline status |
| Compliance |
CE, C-Tick |
| Operating Environment |
0º to 50ºC ambient temperature
0% to 95% RH non condensing |
| Construction |
Alloy/Steel wall mount case with epoxy
finish |
| Dimensions |
H 320mm x W 225mm x D 75mm |
| Weight |
Packed weight 3.9kg |
|
OUR PRODUCTS
