- Telephone line powered
- Call timer on/off switch
- Adjustable time out to limit prank calls and false alarms (approximately
6 seconds - 5 minutes)
- Auto-answer feature allows remote monitoring (can be disabled)
- Weather resistant
- Optional EWP (Enhanced Weather Protection)
- Adjustable microphone and speaker volume
- Vandal resistant, black powder painted, aluminum face plate with mounting
gaskets
- Flush mountable using included rough-in box
Overview
The Viking speaker phones are designed to provide two-way handsfree communication.
Viking speaker phones are used in commercial, industrial and residential door
security. They are useful in door or gate communication, Truck stop/gas station
fuel island communication, business delivery entrances. You can even use these phones
in conjunction with a Viking Hot-Line Dialer on C.O. lines or analog PABX/KSU stations.
Performance Features
The Viking speaker phones can be connected directly to a C.O. line or analog
PABX/KSU station when used in conjunction with a Hot-Line Dialer or programmed ring
down circuit.
The Viking speaker phones can also be used with Viking’s DLE-200B ring down circuit.
When the "Call" button is pressed, the phones will come off-hook and will remain
off-hook until CPC is detected or the pre-selected timeout has elapsed (adjustable
from approximately 6 seconds - 5 minutes). During this time the user may converse
handsfree.
Design Features
For outdoor or harsh environments, the phones are available with EWP (Enhanced
Weather Protection). EWP products feature rubber gaskets and boots, hand soldered
silicon sealed connections, gel filled tip and ring connectors, as well as urethane
potted circuit boards with weather sealed, field-adjustable trim pots and DIP switches
for easy on-site programming.
Specifications
Power |
Telephone line powered (18 VDC/20mA minimum) |
Dimensions: |
Overall: 127mm x127mm x 57.2mm (5” x 5” x 2.25”),
Rough-in box: 102mm x 102mm x 57mm (4” x 4” x 2.25”) |
Shipping Weights |
0.91 kg (2 lbs) |
Standard Environment |
-26°C to 54° C (-15° F to 130° F) with 5% to
95% non-condensing humidity |
Speaker Volume |
Approximately 70db maximum @ 1m |
Ring Voltage |
30V AC RMS minimum CPC Disconnect |
Time |
300ms minimum REN: 0.7A |
Standard Connections |
(1) 2-position terminal block |
EWP Connections |
(2) gel-filled butt connectors |