- Don't just watch movies; feel like you're there
- Get double the power of the gold transducer
- More effective than a subwoofer
Overview
Don't just watch a movie: experience it! Just mount this tactile transducer under
the wood floor beneath your seating area, and it will literally shake the floor
during explosive low-frequency viewing moments to add an incredible sense of realism
to your movie-watching experience. Unlike other products that only add vague bass
vibrations, the Clark Platinum Transducer produces vibrations over the full range
of frequencies, adding a tactile experience to not only movies, but music and video
games as well, without the use of a subwoofer.
Performance Features
When attached to a resonant surface, the Clark Platinum Transducer supplements ordinary
speakers and subwoofers, effectively increasing the proportion of sound you hear
and feel. If you do not have a wood floor or do not have access beneath the floor,
instructions are given on how to build a raised wood platform. The other alternative
is to install the units in the frame of your seat.
Design FeaturesTo get the most out of a transducer
it is recommended that it be connected to its own dedicated amplifier of at least
100 watts. The amp should have its own volume control so you can tune the effect
relative to the audio level. The hi-fi quality of the amp is not critical, so relatively
inexpensive amps can be used. RCA-type audio cables and speaker cable are also required
and sold separately.
The Clark Platinum Transducer has double the output of the
Gold
Clark Synthesis Tactile Sound Transducer. This is accomplished by
increasing the quantity of the Neodymium material and specialized components. The
transducer uses a huge 20 oz. neodymium magnet structure to produce a whopping 6.9
pounds of force per watt. At the input limit of 135 watts RMS, each transducer is
capable of exerting over 932 pounds of force on the bottom of your floor. With this
impressive output, the device will work in floors, risers, and many types of seating.
The tactile transducer is actually a full-range 20Hz-17kHz driver that can also
be installed on spas and swimming pools to provide sound that can be heard underwater.
Multiple units can be added for larger rooms.
Specifications
| UPC |
645509004298 |
| Dimensions: |
8" diameter x 2.25" H |
| Magnet Assembly: |
20 oz., 42 MGO Neodymium |
| Transduction Force: |
6.9 ft.-lbs./watt |
| Tactile Force Peak: |
932 ft.-lbs. |
| Peak Power Handling: |
400 watts |
| Continuous Power Handling: |
135 watts |
| Frequency Range (Tactile): |
5 Hz to 800 Hz |
| Frequency Range (Overall): |
20 Hz to 17 kHz |
| Heat Transfer Fluid: |
Ferrofluidics S32 |
| Impedance: |
4 ohms |
| Overload Protection: |
Polyswitch |
| Voice Coil: |
Kapton® former |
| Dome Material: |
Cevian polyalloy |
| Electrical Connection: |
3', 14AWG OFC |
|
OUR PRODUCTS
