- Whole-house paging and music mute
- Phone-to-phone intercom
- Music-on-hold Caller on-hold Off-hook and on-hold alerts
- 2-way door station communications and latch control (ELAN door stations
required)
- Two digitally-sampled door chimes
- Telemute
- Relay control
Overview
ELAN was the pioneer in the integration of standard touch-tone telephones into
distributed audio systems, and the Z·600 Comm Controller is the culmination of years
of experience in this arena.
You don't need a big instruction manual. There's 'M' for mute, 'P' for page, and 'D' for door. Keep that straight and you can use the system in a minute. I think all houses should have the door-paging system.
We does that feature better than anyone else."
Performance Features
The concept is simple. Instead of walking up to a box mounted on the wall, all
you need to do is pick up any telephone to communicate throughout the home. Easy-to-remember
key presses initiate features such as Whole-House Paging, Phone-to-Phone Intercom,
Two-Way Door Station Communications and Caller-On-Hold. Pages are heard over the
same speakers that were installed for music distribution. If a caller is on hold,
the Music-On-Hold feature will keep them entertained.
Design Features
Additional features let you control door/gate latches and activate relay-controlled
devices such as lighting and garage door openers from any touch-tone phone. Add
up to two ELAN door stations and get digital door chimes broadcast throughout the
home.
And the Z·600 isn’t just for use with ELAN systems—it’s a stand-alone component
that integrates into any receiver-based system in lieu of an old-fashioned intercom
Specifications
House Phone Battery Voltage |
24VDC
|
C.O. Access Lines |
1 per Z·600 (up to 4 Z·600s
can be linked together
for multi-line capabilities) |
RJ-11 “Telco” Interface |
Cat-5 |
Page/Door Chime Mono Output |
0 to 2.5V p-p adjustable
|
Page/Door Chime DC Control
Output |
open collector
|
Music-On-Hold Input Level |
0 to 2.5V p-p adjustable,
Line Level only |
Volume Control Override
Output |
+12VDC @ 250mA internally
powered
+12VDC @ 1.5A when using a PWR12 power supply |
Door Speaker Interface |
22-24AWG, 4 twisted-pair,
shielded wire with drain terminated to
ELAN C45P RJ-45 interface cable |
Relay Type |
SPST
|
Contact Rating |
30VAC/DC,
1A max |
Power Requirements |
120VAC, 12W or 230VAC,
12W
ETL® Listed and CE approved |
Size |
17" W x 2-1/4" H x 10
" D
432mm W x 58mm H x 254mm D |
|