- Cool-running, sleek case in machined-from-solid aluminum isolates and
screens the circuitry
- Short, simple audio signal path design with resulting high density circuitry
minimize electrical pickup
- Includes both single-ended and balanced inputs, easily selected by a
switch on the back panel.
Overview
The Linn Klimax 500 Solo is a high performance single speaker power amplifier
designed for use in multiamplifier, multi-channel audio and audio/visual information
and entertainment systems. Linn’s patented circuitry delivers 500W of clean, silent
power with signal pitch accuracy from a cool running LP sized product less than
6cm thick, weighing less than 10 kilos.
Performance Features
The case is precision machined from two solid sections of aluminum alloy. The
compact form of the Klimax case reflects our intention to keep the audio signal
path as short and simple as possible. This applies as much to a turntable pickup
arm as it does to a power amplifier. Applying this rule rigorously results in high
density circuitry which generates and receives the absolute minimum level of electrical
noise.
The transformer in the Klimax is less than 40mm (1.5 inches) cube. At 50/ 60
Hz it could deliver about 5 Watts. In the Klimax it can deliver 1000 Watts. The
reservoir capacitors in the Klimax are about the size of a thimble but give better
filtering than ones the size of a beer can used in other very powerful amplifiers.
Design FeaturesThe machined-from-solid clamshell
construction of the Klimax casework is a beautiful and unique design allowing a
variety of options for music, home theatre and custom installation applications.
Several Klimax Amplifiers can be wall mounted with V-Klip brackets where space is
a premium, for example with marine applications.
The compact case housing the Klimax Solo screens, protects and stabilises the
internal electronics forming a heat exchanger that dissipates the heat from the
amplifier circuitry. Inside are two electronically and mechanically isolated circuit
boards, one a new Linn Silent Power Switch Mode Power Supply, the other, the unique
audio circuitry providing unsurpassed performance from a compact audio component.
Specifications
Mains input range: |
90Vac - 126Vac
200Vac - 253Vac
@50/60Hz |
Maximum input power |
900W |
Typical operating input power |
39W |
Standby power |
3W |
Input connectors |
Single ended: WBTphono socket |
XLR |
Pin 1: 0V; Pin 2: Hot; Pin 3: Cold |
Gain |
Single ended: 28.6dB
Balanced: 22.6dB |
Input Impedence |
7k6 Ohms |
Output power |
500W rms into 4 Ohms
290W rms into 8 Ohms |
Load tolerance |
Unconditionally stable into all loudspeaker loads |
Harmonic distortion |
<0.02% |
Frequency response |
2Hz - 60KHz (-3dB) |
Peak output voltage |
70V |
Output power: |
500W rms into 4 Ohms
290W rms into 8 Ohms |
Input level for clipping |
Balanced- 3.34 Vrms
Single ended - 1.67 Vrms |
Signal sensing threshold |
>150uV |