- 200 watts total (2 x 100 watts at 4ohms)
- Compact half-rack design
- Stereo RCA audio input and output
- Audio sensing, to allow the amplifier to be turned on from an external
source audio signal
- External voltage to trigger the unit on or off (3-30 volts AC or
DC)
- Individual left and right
Overview
The NV-P2100 delivers high efficiency stereo amplification at 200 watts. The
amplifier is compact, powerful, and cooler than other amplifiers. High efficiency
technology means you’ll use less operating power with the NV-P2100 than with other
amplifiers. And output relays eliminate external interference and protect speakers
from dangerous voltages, unwanted pops, and extraneous noise.
Performance Features
Boost the amplification of your Simplese or Essentia whole-house audio distribution
system with our compact 200-Watt Amplifier. This amplifier offers two channels of
clean, pure sound, and integrates features of typically much more expensive and
complex amplifiers. High-efficiency technology allows it to run significantly cooler
than other analog amplifiers and requires less operating power.
So placing it in a rack with your expensive and sensitive audiovisual equipment
does not pose a heat risk. Plus its compact, half-rack size allows it to fit easily
on top of the Simplese, or fit two units side-by-side on top of the Essentia.
Design Features
The 200-Watt Amplifier features a switchable audio sensing trigger, allowing
it to be turned on from an incoming audio source. This makes it ideal for use in
conjunction with whole-house audio systems when additional power is needed.
The unit can also be triggered to turn on using an external voltage of 3-30 volts,
either AC or DC, enabling the amplifier to be turned on or off from a switched remote
power source. Independent left and right channel sensitivity control lets you maximize
the potential volume of any audio source.
Specifications
Power |
200 watts total (2 x 100 watts at 4 ohms) |
|
Stereo RCA audio input and output |
|
Audio sensing, to allow the amplifier to be turned on from an external
source audio signal |
External voltage |
3-30 volts AC or DC to trigger the unit on or off |
|
Individual left and right channel sensitivity trim pots |
|
|