Smart Home UAE View Cart
Smart Home UAE Order Status
Smart Home UAE Member Login




Home » Lighting & Dimming » User Frontend » SH709 Insteon ApplianceLinc V2 3-Pin

SH709 Insteon ApplianceLinc V2 3-Pin


Insteon ApplianceLinc V2 3-Pin

  • Control a non-dimmable florescent light or appliance, turning it on and off remotely
  • Super-quiet ON/OFF operation
  • Easy-to-install dimmer uses INSTEON (patent pending) technology for superior performance and reliability
  • INSTEON technology received the Consumer Electronic Show (CES) Innovations 2005 Design and Engineering Award

Overview

ApplianceLinc V2 — Our Most Advanced Remote-Controllable Plug-In On/Off Switch Fill your entire home with personalized mood lighting for any occasion. The ApplianceLinc V2 is a full-featured plug-in on/off switch that can be remotely controlled by a ControLinc tabletop controller, KeypadLinc V2, or any other INSTEON controller. This simple-to-use plug-in on/off switch has advanced features like local control, so you can still use the appliance's built-in switch to turn device on and off. The ApplianceLinc V2 is made to plug into a 3-pin outlet. This on/off module controls all standard appliances like fans, florescent lights, and many other non-dimmable devices up to 15 amps and incandescent lights up to 480 watts. If you need to control a dimmable lamp, try the LampLinc V2 2-Pin, or the grounded LampLinc V2 3-Pin, which allow on/off and brightness control.

Never come home to a dark house again: Install Smarthome Manager Essential's Timer Software on your computer to schedule any ApplianceLinc V2 or any other INSTEON-enabled device to turn on or off at any specific time or even at sunrise and sunset.

Performance Features

Easy To Install

The ApplianceLinc V2 is easy to install and set up and yet so affordable, you'll want to add ApplianceLinc V2 on/off modules to all of your appliances that you want to control remotely. Just unplug the appliance and plug it into the bottom outlet of the INSTEON ApplianceLinc V2 On/Off Module, and then plug the module back into the wall outlet. Link the ApplianceLinc V2 to an INSTEON controller using the Plug & Tap programming method, and you'll be able to turn the appliance on and off from any linked INSTEON-enabled controller. If this is your first INSTEON installation, the best way to ensure you get everything needed to provide the most reliable communication among devices is to buy the complete Plug-In Dimmer INSTEON Starter Kit, which includes everything required to set up your INSTEON network, including two LampLinc V2 Dimmers, a pair of SignaLinc RFs to ensure INSTEON network reliability, and the desktop ControLinc. Learn more about INSTEON here.

Pass-Through Outlet

In addition to the INSTEON-controlled outlet, the ApplianceLinc offers a non-controlled outlet on the front face, so you won't have to unplug your appliance module just to find a place to plug in the vacuum cleaner.

Create Multi-Way Circuits

The ApplianceLinc V2 On/Off Module allows you to customize your lighting setup no matter how your house is wired. It's simple to create a 3-, 4-, or 5-way controlled appliances. Plug the device you want to include in the circuit into the module, then plug the ApplianceLinc V2 into an open outlet. Link the ApplianceLinc V2 to all the INSTEON-enabled wall switches and Tabletop Controllers that you want to control the ApplianceLinc V2 On/Off Module for a flexible, fully functional multi-way controlled appliance.

Scene

Lighting Scenes allow you to control multiple lights, rooms or even the whole home with a single command. Because the ApplianceLinc V2 can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press on an INSTEON controller. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. All member lights and appliances can turn on or off instantly, all controlled with one command from one button. If you want to control multiple scenes from one controller, try the KeypadLinc V2 Dimmer.

Status LED

Get a visual indication when ApplianceLinc V2 is sending or receiving INSTEON or X10 signals. The Status LED is also used for setup programming.

Design Features

Compatibility

The ApplianceLinc V2 On/Off Module is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that the module can respond to X10 commands from an X10 controller. Please note that INSTEON devices repeat INSTEON signals but not X10.

Static Memory

All ApplianceLinc V2 settings are stored in static memory and are not lost during power failures. Additionally, in the event of a power loss, the ApplianceLinc V2 On/Off Module will return the appliance to its last on/off state when power is restored.

Certifications and Warranty

All ApplianceLinc V2 products are safety approved. The factory for SmartLabs Design Products is ISO9002 certified. In order to meet the ISO 9002 standards, the entire factory underwent rigorous inspections of procedures and policies before being certified. The certification received was based on its dedication to high-quality management systems and strict adherence of quality control systems and guidelines. Because of this, Smarthome stands behind the entire ApplianceLinc V2 line of products with a full 2-year warranty.

Specifications

General
Smarthome Product Number 2456S3, INSTEON ApplianceLinc V2 On/Off Module
Warranty 2 years (upgradedable to 7 years)
Operation
Status LED White
Local Control Load sensing (can be disabled)
Setup Memory Non-volatile EEPROM
INSTEON Features
INSTEON Addresses 1 hard-coded out of 16,777,216 possible
INSTEON Links 417
INSTEON Powerline Frequency 131.65 KHz
INSTEON Minimum Transmit Level 3.2 Vpp into 5 Ohms
INSTEON Minimum Receive Level 10 mVpp nominal
INSTEON Messages Repeated Yes
Mechanical
Operating Conditions Indoors, 32 to 122°F, up to 85% relative humidity
Dimensions 4.0" H x 2.5" W x 1.5" D
Weight 5 oz
Electrical
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection MOV rated for 150 Volts
Power Plug 3-pin grounded
Pass-through Outlet 3-pin grounded
Controlled Outlet 3-pin grounded
Maximum Load 480 Watts
Maximum Amps 15 Amps (for resistive loads)
Certification Safety tested for use in USA and Canada (ETL #3017581)
X10 Features
X10 Primary Address 1 optional (comes unassigned)
X10 Scene Addresses 255 possible
X10 Status Request Supported
X10 Powerline Frequency 121 KHz
X10 Minimum Transmit Level 3.2 Vpp into 5 Ohms
X10 Minimum Receive Level 20 mVpp nominal
X10 Messages Repeated No

Career Opportunity | Shipping Info | Privacy & Security | Refer a Friend | Contact us  

  © Digitcom 2006, All rights reserved.